Track saw guide rail storage
Get long and short guide rails off the floor and into a storage system made for their profile. Choose mounts for walls, flat panels, and compatible sectional garage doors.
Choose by rail brand and model. Dedicated options are available where one mount does not fit every profile.
Wall, flat-panel, and sectional-door storage
Start with your rail
Track saw rails can look similar while differing where a storage mount engages them. Start with the brand and model printed on your rail or saw system.
For compatible Makita, Festool, Milwaukee, Powertec, Kreg ACS, WEN, Triton, and Grizzly rails. Kreg Accu-Cut is not supported.
Options: Standard and Universal Short Track Bracket
Shop universal mounts
Dedicated mounts for the TrackSawGuide 1409. Its Short Track Bracket is different from the Universal version.
Shop Milescraft mounts
Dedicated fit for supported Bosch GKT and FSN rails and Mafell MT55cc. These systems do not have a short track.
Shop Bosch & Mafell mounts
Dedicated holder for the PTS01 system and A73TS01 and A73TS02 guide rails. No Short Track Bracket is offered.
Shop Ryobi mountsSend the rail brand and model before ordering. A photo of the rail profile can also help identify the right next step.
No-latch spring geometry
The rail mount began with a workshop question: could a holder work without adding a latch, toggle, or separate moving part?
The answer came through repeated physical revisions. The curved body became the spring, flexing as the rail enters and returning to hold it in place. The geometry is the mechanism.
Watch the rail load and release in one smooth motionPlan the installation
Pick the mounting surface first. Then use the rail length to choose the right standard or short-track support.
Place the brackets where the rail needs support and keep it away from leaning stacks and busy work surfaces.
Plan for: suitable customer-supplied fasteners and a secure mounting structure.
Use open panel space while keeping the rail clear of hinges, tracks, hardware, and normal door movement.
Plan for: panel attachment points, rail length, and operating clearance.
Plan before you order
Choose the rail brand, mounting surface, number of tracks, and rail lengths. The bracket calculator identifies the appropriate configuration without duplicating the full tool on this page.
Clamp access remains open on the shown Makita setup
Protect exposed rail ends
Low-profile end caps protect compatible guide rail ends during storage, handling, and setup while keeping clamp access in mind.
From identification to installation
The mount supports the rail on the side opposite the splinter guard, so the stored rail’s weight does not rest on the splinter guard. Confirm structural attachment and moving-door clearances before use.
Confirmed fit
This guide distinguishes the Universal mount from rail-specific designs and flags systems without a short-rail option.
| Rail brand or system | Recommended mount | Short rail option | Approved surfaces |
|---|---|---|---|
| Makita, Festool, Milwaukee, Powertec, Kreg ACS, WEN, Triton, Grizzly | Universal | Yes | Wall, flat panel, sectional door |
| Kreg Accu-Cut | Not supported | No | — |
| Ridgid R48630B | Dedicated Ridgid | Yes, Ridgid-specific | Wall, flat panel, sectional door |
| Milescraft TrackSawGuide 1409 | Dedicated Milescraft | Yes, Milescraft-specific | Wall, flat panel, sectional door |
| Bosch GKT13-225L, GKT18V-20GCL, GKT18V-20GCL14; FSN1600, FSN1100, FSN800, FSN2100 | Dedicated Bosch/Mafell | Not applicable | Wall, flat panel, sectional door |
| Mafell MT55cc | Dedicated Bosch/Mafell | Not applicable | Wall, flat panel, sectional door |
| Ryobi PTS01; A73TS01 and A73TS02 rails | Dedicated Ryobi | Not available | Wall, flat panel, sectional door |
Common questions
No single mount should be assumed to fit every guide rail. Rail profiles differ between brands and sometimes between systems from the same brand. Use the compatibility guide and choose a dedicated mount where listed.
These configurations are intended for compatible sectional garage doors. The setup depends on door construction, attachment points, rail length, fasteners, and operating clearance. Confirm that the door moves freely before regular use.
A short guide rail may not span the attachment points available on a sectional garage door. The Short Track Bracket provides another arrangement for those shorter sections. The Milescraft, Ridgid and Universal versions are different products.
The answer depends on the rail brand, length, quantity, and mounting surface. Use the Track Saw Guide Rail Bracket Calculator for your planned setup.
The Universal mount supports Kreg ACS rails. It does not support Kreg Accu-Cut rails.
Each bracket includes two 3/4-inch self-tapping sheet-metal screws for appropriate sheet-metal installations. The customer supplies hardware for walls, wood, masonry, and other mounting surfaces.
The mounts are designed for fixed workshop surfaces and compatible garage-door installations. They are not designed for storage in moving vehicles.
Contact Huntington Builds with the rail brand and model before ordering. A photo of the rail profile can help with identification.
Designed from real workshop problems
The track saw mount followed the Huntington Builds process: try the familiar solution, identify the extra step or compromise, and revise the geometry until every part has a job.
Thousands sold. Continued five-star reviews. Used daily in our own shop.
Read the Huntington Builds storyStart with the rail brand and model, then choose the arrangement that fits the wall, door, and rail length in your shop.
Do not see your rail? Contact us before ordering and include the brand and model.
